# How to compare repiping quotes and warranties line by line

> How to compare repiping quotes in Dallas line by line: boundary, fixtures, materials, permit, access, restoration and warranty fine print. See what to ask.

URL: https://fullboredallasrepiping.com/guide/repiping-quotes-and-warranties/

Decision Guide

Two repipe quotes for the same house can describe two different jobs. Lay them side by side on the same lines, then read the warranty terms for what they cover, who stands behind them and what voids them.

Last Updated: November 10, 2026

Key takeaways

- Compare quotes on the same lines: boundary, fixtures, material and fittings, layout, valves, permit, access, testing, restoration, exclusions and payment.
- The lowest total often leaves out patching, the permit or the water heater connections. Check what's missing before what's cheaper.
- A manufacturer warranty covers the product under its conditions. A workmanship warranty is a promise about the installation. Read each one separately.
- Ask for every warranty in writing, with its length, what it covers, what voids it and how to make a claim.

You have two repipe quotes on the kitchen counter and one is thousands higher than the other. How to compare repiping quotes comes down to one habit: line them up item by item before you look at the total. A Dallas repipe quote should name the boundary, the fixtures, the material and fitting system, the layout, the valves, the permit, the access plan, testing, restoration, exclusions and the payment schedule. Then read each warranty for what it actually covers.

[Fullbore Dallas Repiping](https://fullboredallasrepiping.com/) replaces water supply lines in Dallas homes. We don’t advertise a blanket warranty; the warranty on any job is the one written into that job’s estimate plus the product makers’ own documents. This guide shows you how to read both, on our estimate or anyone else’s.

## First, make sure they’re quoting the same job

Before price, check that the quotes describe the same work. A [whole-house repipe](https://fullboredallasrepiping.com/whole-house-repiping/) quote should say where new piping starts, usually at or just after the main shutoff, and which fixtures it ends at. A [partial repipe](https://fullboredallasrepiping.com/partial-repiping/) quote should name every run replaced and every run kept. The buried service line is separate work; our [service line guide](https://fullboredallasrepiping.com/guide/repiping-and-water-service-lines/) explains that boundary.

## The line-by-line checklist

| Line item | What a clear quote says | Watch for |
| --- | --- | --- |
| Fixtures | Each sink, toilet, tub, shower, laundry, ice maker, hose bib, water heater | “Whole house” with no list |
| Material and fittings | PEX-A expansion, PEX-B crimp or clamp, or Type L or M copper, with joining method | Material named, fittings not |
| Layout | Trunk-and-branch, home-run manifold or hybrid | No layout stated |
| Valves | Main shutoff, branch isolation, new stops at fixtures, PRV and thermal expansion tank if needed | Old stops reused without saying so |
| Permit and inspections | Who pulls the DallasNow permit, rough and final inspections included | “Permit if required” |
| Access | Expected openings by room, protection of floors and furniture | No mention of openings |
| Testing | Pressure test before closing walls, flush after cutover | Testing not mentioned |
| Restoration | Patch only, patch and texture, or through primer and paint | “Drywall repair” with no finish level |
| Old pipe | Removed where exposed, or abandoned in place, and where | Silence on abandoned lines |
| Exclusions and changes | Concealed damage, tile, cabinets, how extra work is priced | No change-order method |

Our [manifold vs trunk-and-branch guide](https://fullboredallasrepiping.com/guide/manifold-vs-trunk-and-branch/) and [PEX vs copper guide](https://fullboredallasrepiping.com/guide/pex-vs-copper/) explain the material and layout lines in more depth.

## The lines where prices really differ

Quotes vary most on the things that aren’t pipe. Patch, texture and paint can be a big share of a job, and some quotes leave it out entirely. Water heater connections, a new PRV, a thermal expansion tank and new angle stops each add cost. For a sense of scale, our typical range for a whole-house PEX repipe in Dallas is $4,500 to $15,000 and up; our [repiping cost guide](https://fullboredallasrepiping.com/guide/repiping-cost-dallas/) and [cost estimator](https://fullboredallasrepiping.com/tools/repiping-cost-estimator/) walk through what moves a house within it.

City fees are small next to the work, but they’re real. The City of Dallas fee schedule dated July 1, 2025 lists a $25 stand-alone trade review document handling fee, a $75 reinspection fee and a $200 unauthorized concealment fee per trade. A quote should say who pays for a reinspection if the first inspection calls for a correction.

Want a quote you can compare line by line?

Our estimate lists the fixtures, material, layout, valves, permit, access, testing and restoration level in writing, so you can set it beside any other quote.

Call (469) 846-9377

## Reading the warranty terms

### Manufacturer warranties

PEX tubing, fittings and manifolds, and copper fittings and valves, carry warranties from the companies that make them. These generally cover product defects under conditions the maker sets: using the maker’s matched tubing and fittings, installing to its instructions, staying within rated pressure and temperature. Whether labor or resulting water damage is covered varies by maker, so ask for the document by name.

### Workmanship warranties

A workmanship warranty is a written promise about the installation itself: joints, supports, connections and routing. Read the length, what counts as a defect, the exclusions and how to make a claim. Freeze damage, alterations by others and pressure above a stated limit are common exclusions. Ask whether it transfers to a buyer.

### Red flags in warranty language

- A warranty described only out loud.
- A length with no statement of what it covers.
- “Lifetime” with no definition of whose lifetime or which parts.
- No written claim process.

## What you should get at the end

A quote should also say what you receive when the job is done: the permit number and inspection results, the tubing and fitting maker, any warranty documents, a note of where the shutoffs are and a record of any old pipe left in place. Those papers help a future plumber, your insurer or a buyer understand what was replaced.

## Payments and surprises

A sound payment schedule ties payments to milestones, such as the rough inspection passing and restoration being complete, instead of collecting most of the price up front. Ask how hidden conditions are handled: who decides, how the extra work is priced, and that nothing goes ahead without your written approval.

## When the higher quote is the better deal

A higher quote that includes the permit, testing, restoration and named valves can cost you less in the end than a low quote that leaves you patching walls. If one quote is far lower, ask what it leaves out. And if your pipes have failed in one spot only, our [repair or repipe guide](https://fullboredallasrepiping.com/guide/repair-or-repipe/) may show a smaller job fits.

## Bring your quotes

Bring the quotes you already have when you [request an estimate](https://fullboredallasrepiping.com/contact/). Comparing is easier when every quote answers the same questions, and our [Dallas home repiping guide](https://fullboredallasrepiping.com/guide/dallas-home-repiping-guide/) covers the rest of the decision.

Questions about your house?

Call (469) 846-9377

Related service

[Whole-house repiping](https://fullboredallasrepiping.com/whole-house-repiping/)

We replace every hot and cold supply line from the main shutoff to each fixture, usually rerouted through the attic on slab houses, then tested and inspected before the walls close.

## Questions about this guide

### Why are two Dallas repipe quotes for the same house so far apart?

Usually because they describe different jobs. One may include drywall patching, texture and paint, the City permit and new fixture stops, while the other covers piping only. Fitting systems, layout, valve count and whether old pipe is removed or abandoned also differ. Put both on the same checklist before you compare totals.

### Does a PEX manufacturer's warranty cover labor and water damage in Dallas?

It depends on that maker's written terms. Many PEX warranties are tied to using the maker's matched tubing and fittings and installing to its instructions, and they differ on whether labor or resulting damage is included. Ask for the warranty document by name and read the coverage and exclusions yourself rather than relying on a summary.

### What should a workmanship warranty on a Dallas repipe spell out?

Who issues it, how long it lasts, what counts as a workmanship defect, what's excluded (freeze damage, alterations by others or pressure above a stated limit, for example), whether it transfers to a buyer, and how to report a problem. If any of that is verbal only, get it in writing before you sign.

Want this answered for your house?

On the first visit we trace your lines from the main shutoff to every fixture and show you what the work would involve.

Call (469) 846-9377

## More guides

- Cost Guide [Repiping cost in Dallas: what sets the price of a repipe?](https://fullboredallasrepiping.com/guide/repiping-cost-dallas/)Our typical ranges for a whole-house repipe, why your house can land well above or below the house next door, and how to read two quotes side by side.
- Decision Guide [Should you repair or repipe a house with leaking pipes?](https://fullboredallasrepiping.com/guide/repair-or-repipe/)One leak is a repair. A pattern of leaks on the same pipe is a decision. Here's how to tell which one your Dallas house has, and what sits between the two.
- Decision Guide [PEX vs copper pipes: which suits a Dallas repipe?](https://fullboredallasrepiping.com/guide/pex-vs-copper/)Both are allowed under Dallas's plumbing code, and neither wins in every house. Your route, your attic, your fixtures and what you care about most decide which fits.
- Learn [Do Dallas repiping permits apply to a repipe, and how do inspections work?](https://fullboredallasrepiping.com/guide/repiping-permits-dallas/)A repipe inside the City of Dallas is permitted plumbing work. Here's how the permit, the rough-in and final inspections and the fees fit around your job.
- Learn [The Dallas home repiping guide](https://fullboredallasrepiping.com/guide/dallas-home-repiping-guide/)Leaks that keep coming back, rusty water, a shower that dies when the washer runs: what is going on in your pipes, and how we plan, permit, build and close up a repipe in a Dallas house.